Silicone Band Oil Drum Heater Aquarium Heating Pad Heating Element
Temperature Control and Thermal Management(Preset Built-in Thermostat, Adjustable Thermostat, Built-in temperature sensors(k,J thermocouples, RTD-PT100, digital controller)
Leads Exit and connection tab: Heater's power leads can be configured and an unheated lead exit tab can be added to the heater to eliminate cold sections or when used in a compression application to remove the bulge at lead exit area from between the plates.
To increase heater efficiency, silicone sponge rubber or EPDM insulation can be bonded to the top side of the heater. Typical thermal insulation thicknesses are 5mm, 8mm, 10mm
Silicone Engine Heater Features:
- Silicone rubber insulating material is tough, light, and thin
- Resistant to moisture and chemicals
- Efficient at heat transfer and designed to tight tolerances
- Strong 3M self-adhesive at back for easy installation
- Clean the application surface before sticking the pad to a metal surface
Silicone Engine Heater detail :
| | | | |
Continuous use temperature | ≤200℃ | ≤180℃ | ≤150℃ |
Maximum operating temperature | 250℃ | 250℃ | 150℃ |
| | | 1200x5000mm | 500x1200mm | 1000x1000mm |
| | 10x10mm | 10x10mm | 10x10mm |
| | 0.8-3.0mm(Can be thickened) | 0.16-0.4mm(Can be thickened) | 0.6-3.0mm(Can be thickened) |
| | ≤2W/cm2(Meet rapid temp rising requirements) |
| | Alloy etching heating film/Ni-Cr heating wire | Alloy etching heating film | Alloy etching heating film |
| | Suitable for most heating situations | Suitable for heating in limited installation spaces | Suitable for impact- |
Flexible Heaters and Thermal Insulation Products are flexible in design and application to fit your specific needs. Chromalox provides dedicated engineering support to customize our Flexible heaters per your requirements. Most size, shape or contour can be used to apply direct and efficient heat without sacrificing dependability.
Various insulating materials are available to suit your application environment. Temperature controlling devices can be molded directly to the elements to provide precise system operation. Power requirements can be minimized and heat-up time optimized by applying heat directly to the part. Cool-down time is shortened and distributed wattages or multiple heater circuit designs are possible with our flexible heating elements.
Product Tags:
|
|
1200x5000mm Silicone Heater Pad 250deg Adjustable Thermostat Images
|
